blog1

Commercial Lease Edmonton: Inspect Before You Sign (2026)

No, a commercial lease gives you none of the protections a residential tenancy has. Before you sign, inspect the unit's electrical capacity, heating and ventilation, plumbing, roof and envelope, confirm the permitted use with the City, and find out whether existing work was ever permitted or inspected.

Meta description: Leasing commercial space in Edmonton? Here is what a commercial property inspection covers before you sign a lease, plus the City approvals to check first.

Why Does a Commercial Lease Need an Inspection at All?

Could the unit look ready but still be wrong for your business? The Alberta Residential Tenancies Act says in section 2(1) that it “applies only to tenancies of residential premises.” Section 2(2) also excludes premises occupied for business purposes with living accommodation attached and rented under a single agreement.

A commercial unit lease is a contract you negotiate. Residential protections such as mandatory inspection reports, deposit timelines, notice rules and the Residential Tenancy Dispute Resolution Service do not follow you into a commercial bay. Have a lawyer read the lease itself, including its repair, maintenance, improvement and termination terms.

You may inherit the practical consequences of a unit’s condition or past work, even if you did not cause it. A commercial property inspection in Edmonton helps you assess visible building conditions before you commit to making the space work for your business.

“A residential tenant can walk away from a bad unit at the end of a lease term. A business tenant has already spent the build-out money, moved the equipment and told their customers where to find them. That is why I read a commercial unit harder than a house.”

Banti K Shaw, InspecUs

What Does a Commercial Property Inspection Cover Before You Sign a Lease?

What could affect your build-out, operations or repair responsibilities? I look at the visible, accessible condition of the building and the systems serving the unit, with your planned use in mind.

  1. Electrical service and distribution capacity: Observe the service, panels and visible distribution. Compare available capacity information with the equipment you intend to operate.
  2. Heating, ventilation and makeup air: Review accessible equipment and ducting, condition and apparent configuration. Ask whether it suits your use, especially if you need kitchen exhaust or process ventilation.
  3. Plumbing, drains and grease or sanitary routing: Check accessible fixtures and plumbing, drainage clues and visible connections. Confirm your intended use’s needs with the appropriate professionals and City.
  4. Roof, envelope and water intrusion: Look for accessible signs of leakage, staining, damage or moisture at the roof and exterior envelope.
  5. Fire and life safety systems: Observe accessible fire alarm, sprinkler, exit and emergency-lighting components. A visual inspection does not test or certify these systems.
  6. Structure, floor loading and mezzanine: Look for visible structural concerns and note mezzanines or areas where your equipment and stored goods may require further assessment.
  7. Site, access, parking and loading: Consider visible access routes, loading areas, parking and site conditions that could affect daily operations.
  8. Existing tenant improvements and who built them: Note visible alterations and ask for permits, approved plans and inspection records. Confirm responsibility for existing work with your lawyer and landlord.

For more detail on scope, see our commercial property inspection service and building inspection service.

Commercial property inspection Edmonton: An inspector uses a flashlight while reviewing a commercial electrical panel and meter bank on a concrete block corridor wall.

The Three Things Business Tenants Miss That Cost the Most

What can turn a seemingly simple move-in into extra work? These are common issues to investigate before you agree to a lease or build-out plan.

  • Electrical capacity does not match your equipment. A panel may appear orderly, but the available service may not support your planned equipment. Ask the landlord for service and panel information, then have an electrical professional assess your specific load. Negotiate responsibility for required upgrades and who arranges them before setting your opening schedule.
  • Ventilation suits the previous tenant, not you. Inadequate airflow, heat or lingering odours may be clues that the system or makeup air was designed around another use. Get your requirements reviewed before signing, and clarify who pays for system changes, permits and ongoing maintenance.
  • Unpermitted work is left behind. Altered walls, washrooms, wiring or mechanical equipment without supporting records can raise questions about approval and future work. Request permits and inspection records, then ask the City about the file. Negotiate who must resolve any issue and make your lease or possession timing conditional where appropriate.

Commercial property inspection Edmonton: An inspector and a business tenant look up at a packaged rooftop heating and ventilation unit and exposed ducting inside an open warehouse bay.

“A lot of the commercial units I walk into have work that was never permitted, and the tenant is the one who inherits it. The landlord can lease you the space as it sits. Nobody makes them prove it was ever inspected.”

Banti K Shaw, InspecUs

Check the City File Before You Sign, Not After

Have you confirmed the City allows your exact business activities at this address? Edmonton requires zoning approval when you start a business, move to a new location or change activities in an existing one. Approval is needed for a valid business licence. The City strongly encourages approval before signing, or a conditional lease that is not binding until approval. You can apply for a business licence without signing a lease or occupying the location. Check the City’s zoning approval guidance.

A change-of-use development permit may be needed when a former clothing store becomes a daycare, an apartment becomes an office, a cafe becomes a bar by serving alcohol and prohibiting minors, or a vehicle repair shop expands into auto body repair. If your use is not allowed in the zone, the options are another location or rezoning, which the City describes as long and complicated.

The City’s existing-building guidance says permits are required for changes in use or business intensity; first tenancy in a new shell; interior or exterior alterations; building systems, life-safety systems or footprint changes; and equipment affecting the building. Cosmetic changes such as painting, flooring or cabinetry do not require permits. Re-roofing or re-siding with similar materials and assembly does not require a permit. Most projects need a business licence, development permit, building permit and trades permits, plus a sign permit if you install signs.

Before signing, note these additional City requirements:

  • Warehouse racking: Building permit review applies if stored product exceeds 3.6 metres (12 feet), rubber tires or Group A plastics are stored, the racking is not on a slab on grade, or it is a multi-level system with intermediate work platforms for access without ladders.
  • Energy code: Alterations require applicable energy-code documents if the original building permit was issued after October 31, 2016.
  • Selective interior demolition: Permission to begin some interior demolition while awaiting permits is only available with a complete application for interior alterations to an existing commercial building where no development permit is required. It is not a full building permit, cannot be applied for separately, and is unavailable for change of use, exterior work or additions.
  • Permit clocks and consequences: Starting construction without a building permit may lead to stop-work orders, fines and/or administrative penalties. Changing activities without a development permit may prevent you from obtaining a business licence. Development permits expire after two years if development has not started. A building-permit application expires if an information request remains unmet, or information is insufficient, for more than 90 days. Issued building permits expire 90 days after issuance if work has not started, or 120 days after construction halts.

What Should You Ask the Landlord in Writing?

Would you have a clear record of what you were told? Request:

  1. Permits and inspection records for work done in the unit.
  2. Electrical service size and panel capacity.
  3. HVAC and makeup air capacity, plus who maintains them.
  4. Roof age and who is responsible for repairs.
  5. Responsibility for base-building systems versus tenant equipment.
  6. Permission and responsibility for your build-out.
  7. Hazardous-material information, including asbestos, before demolition.
  8. What happens if zoning approval fails.

What the Inspection Will Not Tell You

Could an inspection answer every lease or approval question? No. A commercial inspection is visual and non-invasive, limited to what is readily accessible. It is not technically exhaustive, does not open walls, and does not determine code compliance, insurability, market value or life expectancy. It does not test tenant equipment or process systems.

It also does not interpret your lease, rent, taxes or operating costs, or provide a zoning opinion. Use the City’s file for permit and zoning questions, and have a lawyer review lease obligations.

Ask what commercial-specific training and credential an inspector has. InterNACHI says it has discontinued its commercial property inspection certification and refers inspectors to CCPIA. A residential certification shown on a website is not the same thing as a commercial credential.

Your Six-Step Playbook Before You Sign

What sequence helps you avoid committing before key questions are answered?

  1. Write down your business activities, equipment and space requirements.
  2. Ask the City whether your use is allowed and what approvals apply.
  3. Request the landlord’s plans, permit records and system information.
  4. Arrange an independent inspection with access to the unit and relevant areas.
  5. Review findings with qualified trades or design professionals where needed, and have a lawyer address lease responsibilities and conditions.
  6. Sign only after resolving approval, build-out, repair and timing questions in writing.

For more space-specific reading, see our guides to warehouse and flex space and restaurant or retail property. Small operators can also review our small business inspection service.

Frequently Asked Questions

Does the Residential Tenancies Act Apply to a Commercial Lease in Alberta?

No. Section 2 of Alberta’s Act limits its application to residential premises and lists exclusions, so a commercial unit lease does not receive its residential protections.

Can I Get a Commercial Unit Inspected Before I Sign the Lease?

Yes. Arrange access with the landlord and book an inspection before signing so you can consider visible conditions and follow up on concerns while negotiating.

Who Pays for a Commercial Inspection, Tenant or Landlord?

Confirm this with the landlord before booking. If you want an independent assessment for your decision, agree in writing on access and who will pay.

How Long Does a Commercial Property Inspection Take?

Timing depends on the unit, its size and access to relevant areas. Ask the inspector for an estimate when you provide details about the space and intended use.

If you are considering a lease in Edmonton, a clear inspection report can help you decide what to ask next. Contact InspecUs to discuss an inspection for your commercial space.

Licensed Professional
Home Inspector

We are licensed by the Licensed Professional and certified through InterNACHI

Covid-19 protocols

InspecUs Home Inspection is certified in the best practices established by Internachi. Our commitment to safety includes maintaining a 6-foot distance and using personal protective equipment (PPE) during all inspections.

Get a Free Quote
Get a Free Quote
close slider